Hi

i have Vicon GP Motion Builder (187) plug in for MB7.5 Ext, but i don’t know how to use it for real time capturing.

Please explain me how to get live char in MB with this plug in.

Ok I myself got the answer for this. If any body wants i can help.. :-)

Hi, I have a Vicon IQ system and motionbuilder I would like to connect in Realtime....

Hi real time in iq is very simple.

first u need to get the tarsus and install it on Ur vicon workstation.

now go to setup mode in IQ and give the IP address of the local system under real time config sub menu.

then connect the real time .( u can get real time connecting button beside the mx hardware connection button ).

if u want to run real time on separate workstation, just change the IP address and install the tarsus on the system where u want to run RT.

to run Real time in motion builder first u need to get the Vicon GP motion builder plugin .

this u can download from vicon site.

then install the plug in.

now open the motion builder and goto asset browser -> Devices -> u will see the vicon GP device.Just drag and drop into the view port.

Now u will get the RT window .

just give the iP address of the system which u r running the tarsus. Then click on the button “GENERATE THE NEW OPTICAL MODEL”.

and tick on the “online” check box .

Done.

If u want labeled markers in MB, u should switch on the vsk in vicon IQ.

Thanks for this, I will be trying this later in the week.

stucap 07 February 2009 07:21 AM

Hi, I have a Vicon IQ system and motionbuilder I would like to connect in Realtime....

Where can I get Vicon? I didn’t find any place where I could download Vicon system from their website. So where can I download/buy it and how much does it cost?

I think u need Vicon Tarsus application and Vicon GP plug in.

If u have vicon support account u can download this from vicon’s downloads page.

If you contact

They can put you in touch with the right people to either sell you the ViconGP plugin or give you pricing.

The way to get started is to quit talking and begin doing.
~Walt Disney

Tried it using MB 7.5 extension 2 and it gives me an error when i start it up saying OMGxerces-c_2_8.dll is missing. Cant se the device. Anyone tried that?

Thanks

hi,

thanks for the quick replie. Tried it, didnt do a thing. still getting the same error. Using mb 7.5 ext 2a by the way. Could that make a difference.

tried that too, and it still gives me that same error. I installed the ViconGPMotionbuilder_Realtime_6_0_187_40280 for mb 7.5 ext2 on the desktop. copied the files to the corresponding folder in a fresh install of mb 7.5 ext 2.

Made the plug in work without errors in MB 7.5, but the vsk is not moving when I turn on the real time bones.